Asus VE228TLB - Manual (Page 18)

3-2 Chapter 3: General Instructions
Color 2.
You can adjust Brightness, Contrast,
Saturation, Color Temp., Skin Tone,
and Smart View from this menu.
Brightness • : the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
Contrast
• : the adjusting range is from 0 to 100.
Saturation • : the adjusting range is from 0 to 100.
Color Temp. • : contains four modes including Cool, Normal, Warm, and
User Mode.
Skin Tone • : contains three color modes including Reddish, Natural, and
Yellowish.
Smart View
• : provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3. Image
You can adjust Sharpness,
Aspect Control, ASCR, Position
(VGA only), and Focus (VGA
only) from this menu.
Sharpness • : the adjusting
range is from 0 to 100.
Aspect Control
• : adjusts the
aspect ratio to “Full”, or “4:3”.
ASCR
• : turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
Position • : adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
Focus • : reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one •
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.