Hyper transport configuration, Sb to k8(cpu) freq auto [disabled – Asus M2N-VM DVI User Manual
Page 76

2-30
Chapter 2: BIOS setup
Hyper Transport Configuration
The sub-menu allows you to change the Hyper Transport settings.
SB to K8(CPU) Freq Auto [Disabled]
Enables or disables the CPU to automatically adjust Hyper Transport frequency.
Configuration options: [Disabled] [Enabled]
SB to K8(CPU) Frequency [1000 MHz]
Allows you to set the Hyper Transport frequency. This item appears when you set
the MCP55(SB) to K8(CPU) Freq Auto to Disabled.
Configuration options: [2�� M�z] [4�� M�z] [8�� M�z] [1��� M�z].
SB to K8(CPU) LinkWidth [16 16 ]
Sets the Hyper Transport width.
Configuration options: [4 4 ] [8 8 ] [16 16 ]
Hyper Transport Configuration
SB to K8(CPU) Freq Auto
[Disabled]
SB to K8(CPU) Frequency
[1000 MHZ]
SB to K8(CPU) LinkWidth
[16 16 ]
SouthBridge to K8(CPU)
frequency selection
by CPU capability
E3608_M2N-VM-DVI.indb 19
12/27/07 4:40:01 PM