Ultramobilepc 51, Portbar, Lan port (disabled when using portbar) – Asus R2E User Manual

Page 51: Display (monitor) output (with provided adapter), Spdif output jack (spdif output), Usb port (2.0/1.1)

Advertising
background image

UltraMobilePC

51

1

2

3

4

PortBar

2

3

1

4

Notes: (1) AC power adapter must be used. Cannot be used when UltraMobilePC is

in battery mode. (2) Recommend using two AC power adapters (one on the UltraMo-

bilePC and one on the PortBar) when using all ports on UltraMobilePC and PortBar.

(3) Disables UltraMobilePC’s LAN port when connected.

LAN Port (disabled when using PortBar)

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem

port and supports a standard Ethernet cable for connection to a local

network. The built-in connector allows convenient use without addi-

tional adapters.

Display (Monitor) Output (with provided adapter)

The provided VGA adapter for the expansion port will provide a 15-pin D-sub

analog output to support a standard VGA-compatible device such as a monitor

or projector to allow displaying on a larger external monitor.

SPDIF Output Jack (SPDIF Output)

This jack provides connection to SPDIF (Sony/Philips Digital Interface)

compliant devices for digital audio output. Use this feature to turn the

UltraMobilePC into a hi-fi home entertainment system.

2.0

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB

1.1 devices such as keyboards, pointing devices, cameras, hard disk drives,

printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1)

and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously

on a single computer, with some peripherals acting as additional plug-in sites or hubs.

USB supports hot-swapping of devices so that most peripherals can be connected or

disconnected without restarting the computer.

Advertising