Asus P5L-MX/IPAT - Manual (Page 55)

ASUS P5L-MX/IPAT 2-11
2.4.7 ACPI Settings
The items in this menu allows you to change the settings for the Advanced
Configuration and Power Interface (ACPI). Select an item then press
<Enter> to display the configuration options.
Enable ACPI Auto Configuration [Disabled]
ACPI Sleep State [S3(suspend to RAM)]
Enable or Disable BIOS
ACPI Auto Configuration.
2.4.6 Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
Enable ACPI Auto Configuration [Disabled]
Allows you to enable or disable the ACPI auto configuration.
Configuration options: [Enabled] [Disabled]
The following items appear only when the Enable ACPI Auto Configuration
item is set to disabled.
ACPI Sleep State [S3(Suspend to RAM)]
Allows you to select the highest ACPI sleep state the system would enter
when the SUSPEND button is pressed.
Configuration options: [Suspend Disabled] [S1(CPU Stop Clock]
[S3(Suspend to RAM)]