Asus RT-N11 - Manual (Page 10)

RT-N11 EZ Wireless N Router User Manual
8
PPTP or L2TP user
If you are using PPTP services, select
ADSL connection that requires
username, password and IP address. It
is known as PPTP. Fill in the username
and password provided by your ISP into
the fields. Click Next to continue. For L2TP
users, follow the same instructions above.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select
ADSL or other connection type that
uses static IP address. Key in the
IP address, subnet mask, and default
gateway provided by your ISP. You
can specify DNS servers, or get DNS
information automatically.
3. After the connection type setting
is completed, set up your wireless
interface. Specify to your wireless
router an SSID (Service Set Identifier),
which is a unique identifier attached to
packets sent over WLAN. This identifier
emulates a password when a device
attempts to communicate with your
wireless router via WLAN.
If you want to protect transmitted data, select any of the Security Level below to enable
encryption methods:
Medium: Only users with the same WEP key settings can connect to your wireless router and
transmit data using 64bits or 128bits WEP key encryption. Configure the settings as Open
System/WEP instead of Shared Key/WEP.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.