Asus P5N73-CM - Manual (Page 58)

2-18 Chapter 2: BIOS setup
Parallel.Port.Mode.[ECP]
Allows you to select the Parallel Port mode. Configuration options: [SPP] [EPP] [ECP]
[ECP+EPP] [Normal]
The “ECP Mode Use DMA” item becomes user-configurable when the Parallel.Port.Mode
item is set to [ECP] or [ECP+EPP]
The “EPP Mode Select” item becomes user-configurable when the Parallel.Port.Mode item
is set to [EPP] or [ECP+EPP]
EPP.Mode.Select.[EPP1.7]
Allows you to select EPP mode. Configuration options: [EPP1.9] [EPP1.7]
ECP.Mode.Use.DMA.[3]
Allows you to select ECP mode use DMA. Configuration options: [1] [3]
2.4.7 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
USB.Controller.[Enabled]
Allows you to enable or disable the USB controller. Configuration options: [Disabled]
[Enabled]
USB.2.0.Controller.[Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB.Legacy.Support.[Enabled]
Allows you to enable or disable support for USB devices on legacy operating systems (OS).
Configuration options: [Disabled] [Enabled]
2.5. Power.menu
The Power menu items allow you to change the settings for the Advanced Configuration and
Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then
press <Enter> to display the configuration options.
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Tools Exit
ACPI Suspend Type [ S1&S3 ]
ACPI APIC support Enabled
APM Configuration
HardWare Monitor