Chapter 3, 4 ai net 2, 5 post state leds [enabled – Asus M4A89GTD PRO/USB3 User Manual

Page 99: Check realtek lan cable [disabled, Start o.c. profile

Advertising
background image

ASUS M4A89GTD PRO Series

3-39

Chapter 3

Current CMOS

Restore CMOS

A:

Note

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

PATH:

A:\

BOARD:

M4A89GTD PRO Series

VER:

0109

DATE:

01/07/2010

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

ASUSTek O.C. Profile Utility V2.12

•

This function can support devices such as a USB flash disk with FAT 32/16 format and

single partition only.

•

DO NOT shut down or reset the system while updating the BIOS to prevent the

system boot failure!

•

We recommend that you update the BIOS file only coming from the same memory/CPU

configuration and BIOS version.

•

Only the CMO file can be loaded.

3.9.4

AI NET 2

Check Realtek LAN cable [Disabled]

[Disabled]

BIOS will not check the Realtek LAN cable during the Power-On Self-Test

(POST).

[Enabled]

BIOS checks the Realtek LAN cable during the Power-On Self-Test (POST).

3.9.5

POST State LEDs [Enabled]

[Enabled]

Enables the onboard DRAM_LED.

[Disabled]

Disables this function.

AI NET 2

Pair Status Length

Check Realtek LAN cable

[Disabled]

BIOS SETUP UTILITY

Tools

Start O.C. Profile

Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility.

Advertising
This manual is related to the following products: