Asus M4N82 Deluxe - Manual (Page 76)

3-16 Chapter 3: BIOS setup
Chapter 3
DQS Timing Configuration
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
change the advanced DQS settings.
DQS Timing User Controls [Auto]
Allows adjustments of the advanced DQS parameters.
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
The following sub-items appear only when you set the DQS Timing User Controls item to
[DCT 0], [DCT 1] or [Both].
CKE Setup Time [Auto]
Allows selection of the default setup time for the CKE pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CKE Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the CKE pins are delayed from the default setup time. Type the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust
the value. The value ranges from 0 to 31.
CS/ODT Setup Time [Auto]
Allows selection of the default setup time for the CS/ODT pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CS/ODT Fine Delay [00]
Appears only when you set the CS/ODT Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to
set how long the CS/ODT pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
Addr/Cmd Setup Time [Auto]
Allows selection of the default setup time for the Addr/Cmd pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
Addr/Cmd Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the Addr/Cmd pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
The following six (6) items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
DQS Timing Configuration
DQS Timing User Controls [Auto]
BIOS SETUP UTILITY
Ai Tweaker
Manual allows user to
tweak DQS values