Asus WL-320gE - Manual (Page 33)

3. Software
ASUS 802.11g Access Point 33
Chapter 3 - Software Configuration
Access Point
3..3 Access Control
Note: Click the “Finish” button to save your new settings and restart the ASUS 802.11g AP or
click “Save” and restart later.
For better security, you can select to “Accept” or “Reject” wireless clients that
connect to the ASUS 802.11g AP.
Selecting “Disable” allows all wireless clients to connect to the ASUS 802.11g AP.
Adding a MAC Address
To add a MAC address, key in the MAC address with 12 hexadecimal characters
into the “MAC Address” field and click the Add button. The new MAC address is
listed in the control list below. You can only enter a maximum of 31 MAC addresses
into this page.
Items in the dropdown list:
Disable (no info required)
Accept (need to input information)
Reject (need to input information)