SoundMax SM-DVD5107 - Manual (Page 3)

3
Before you start
Utilization of the product
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for
used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed
product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health.
Important safeguards
The lightning flash is intended to alert the user to the presence of dangerous voltage within the product's
enclosure, and touching the inner parts may result in a risk of electric shock to persons.
The exclamatory mark is intended to alert the user to the presence of important operating instructions.
To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel.
This mark indicates this unit belongs to class 1 laser product. The laser beam may produce radiation harm to the
directly touching human body.
To prevent the risk of fire or electric shock, don’t allow water to come into contact with the device and don’t use the
device in high humidity conditions.
The device is equipped with high voltage components and a laser system; hence you shall not open the device and
repair it by yourself. The laser beam is dangerous to eyes when the housing is removed. Don’t look at it.
When the device is moved from cold premises to the warm room or vice versa, condensate may form on the laser head
and the device may not operate properly. In this case please turn the device on for 1-2 hours without disc before
playback to heat it to a proper operation temperature.
Don’t try to manually open or close the disc tray to load discs.
Disconnect the receiver only when there is no disc therein.
If you are not going to use the device for a long time disconnect it from the wall outlet.
Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on or excessively
bend it, as this could cause electrical damage and result in a fire or electrical shock.
Do not insert the plug with wet hands, as this may result in electrical shock.