Asus GigaX2124 - Manual (Page 40)

28
Chapter 4 - Configuration Management
ASUS GigaX2124
4.8 Bridge
Figure 26. Bridge menu
The Bridge page group contains most layer 2 configurations, like link
aggregation, STP, etc.
4.8.1 Spanning tree
The page configures three types of Spanning Tree Protocol.
4.8.1.1 STP Status
The “STP Status” can disable or enable STP. There are three modes STP,
RSTP and MSTP can be enabled. If MSTP is enabled, the following four
attributes are enabled at the same time:
Region Name: An alphanumeric configuration name
Revision: A configuration revision number
Instance ID: A STP instance, you can configure MSTP on your switch
to map multiple VLANs into a single STP instance.
VLAN Group: A group associates each of the potential 4094 VLANs
to the given instance