Asus DSL-N10S - Manual (Page 26)

6 DSL-N10S Chapter 4: Configuring via the web GUI
Setting up the Wi-Fi Protected Setup (WPS)
WPS (Wi-Fi Protected Setup) allows you to set up a secure and protected wireless
network easily.
Note: Ensure that you use a wireless LAN adapter with WPS function.
To set up the WPS:
Press the WPS button on your router for more than four seconds. 1.
Click Network > Wireless tab >WPS.
Press the WPS button on the wireless LAN card and click Start PBC.
You may also choose to key in the wireless LAN card’s PIN code, then
click Start PIN.
.
3.
Notes:
• Refer to the documentation that came with the wireless LAN card for the wireless LAN
card’s PIN code.
• Ensure to press the WPS button for more than four seconds to enable the WPS function,
otherwise you might turn on/off the Wi-Fi function.
• The Wi-Fi switch function is only available in some countries or regions.