Asus WL-500W - Manual (Page 16)

WL-500W Wireless Router Quick Start Guide
5
English
2) Setting up FTP site
WL-500W can also serve as an FTP site. You can make your FTP site accessible to
all users, or set up an access policy to restrict anonymous login. To use this feature,
you need to plug a USB storage disk to the USB2.0 port on the rear panel of WL-
500W. Make sure the hard disk is formatted and partitioned properly.
1. To a l l o w a n o n y m o u s
l o g i n : S e t N e t w o r k
Neighbourhood Mode to
Share all partitions in
disk, FTP Mode to Login
to first partition. The
anonymous login directory
is the root directory of first
partition.
To allow accout login only: Set
Network Neighbourhood Mode
to Apply rules in shared node
list, FTP Mode to Login to
first matched shared node.
Click Add in the Share Node List
to specify the access directory
and access right of FTP account.
2. The Maximum Login User field
specifies the maximum number
of concurrent users. The default
value is 6.
3. Click Finish to activate the
settings and reboot. This process
may take several minutes.
4. Type ftp://2.68.. into
the address box of your Web
browser and press Enter to
login the FTP site.