Hardware setup, Asus tuv4x user’s manual 17 – Asus TUV4X User Manual
Page 17
ASUS TUV4X User’s Manual
17
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
Motherboard Frequency Settings (DIP Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The example below shows all the switches in the
OFF position.
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting
JEN
Enable (JumperFree)
[2-3] (default)
Disable (Jumper)
[1-2]
NOTE: In JumperFree™ mode, set all DIP switches (DIP_SW) to OFF.
TUV4X DIP Switches
ON
1 2 3 4 5 6 7 8
OFF
ON
< F
requency Multiple
< Frequency Multiple
< Frequency Multiple
< Frequency Multiple
< Frequency Selection
< Frequency Selection
< Frequency Selection
< Frequency Selection
TUV4X
®
TUV4X JumperFree™ Mode Setting
Jumper
Mode
JumperFree
Mode
(Default)
2 3
JEN
1 2
ON
1 2 3 4 5 6 7 8
OFF
DIP_SW
TUV4X
®