Asus L84B - Manual (Page 67)

67 5. Configuring the BIOS
IDE Primary Slave
In this field, indicate the size of a disk drive or the device type, such as a CD-ROM drive. The arrow
head icon indicates that this field contains a sub-menu. The sub-menu is used to configure the IDE Hard
Disk installed in the system.
To configure a hard disk drive, move the cursor to highlight the IDE Primary Slave field, and press
[Enter]. The following sub-menu screen will appear. The fields and options on this sub-menu are the
same as the previous menu described earlier. Set the type as CD-ROM in this field to support an in-
serted CD-ROM or DVD drive module.
NOTE: After using the legend keys to make your selections in this sub-menu, press
the [Esc] key to return to the Main menu.
Item Specific Help IDE Primary Slave [TOSHIBA DVD-ROM SD-C2302]
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
This setting enables
or disables 32 bit IDE
data transfers.