Asus P5Q-EM DO - Manual (Page 83)

ASUS P5Q-EM DO 2-31
2.6 Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
2.6.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
2.6.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
2.6.3 ACPI 2.0 Support [Disabled]
Add additional tables as per ACPI 2.0 specifications.
Configuration options: [Disabled] [Enabled]
2.6.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)
support in the Advanced Programmable Interrupt Controller (APIC). When set to [Enabled],
the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options:
[Disabled] [Enabled]
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [Disabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
P5Q-EM DO.indb 31 12/9/08 12:36:01 PM