Asus WL-320gE - Manual (Page 16)

WL-320gE Access Point Quick Start Guide

English
5..Setting.up.your.wireless.interface..To.set.up.your.wireless.interface,.follow.the.same.
instructions.from.3.to.5.as.above.Configurating.Wireless.Interface.in.Access.Point.mode.
on.page.10..You.can.change.to.AP.or.WDS(Bridge),.Station(Client),.or.URE(Repeater).
accordingly..Click. Save&Restart.to.restart.the.wireless.router.and.activate.the.new.settings.
This.chapter.gives.information.on.the.operation.modes.of.the.ASUS.WL-320gE.Access.Point.
1) Bridge Mode (WDS)
Wireless.bridge,.also.known.as.Wireless.Distribution.System.or.WDS,.allows.you.to.connect.
to.one.or.many.Access.Points..If.you.set.the.same.SSID.among.all.access.points,.wireless.
security.level.could.be.up.to.WPA-PSK..Otherwise,.security.level.is.WEP.only.
8) Operation Mo��es
Access Point
AP.Mode.configures.the.ASUS.802.11g.AP.for.a.specific.purpose..By.default,.the.ASUS.
802.11g.AP.is.set.to.serve.as.an.“Access.Point”.where.a.wireless.mobile.client.can.connect.
wirelessly.to.a.wired.Ethernet.network.
WDS Only
With.WDS,.the.ASUS.802.11g.AP.can.only.communicate.with.other.Access.Points.
Hybrid
Hybrid.allows.you.to.use.the.ASUS.802.11g.AP.both.as.an.access.point.and.as.a.wireless.
bridge.
Channel
Both.Access.Points.in.Wireless.Bridge.mode.must.be.set.to.the.same.channel.