Asus CUSL2-C BP - Manual (Page 40)

40 ASUS CUSL2-C Black Pearl User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
18) USB Headers (5-pin USB2, 5-pin USB56)
If the USB ports on the back panels are inadequate, two USB headers are avail-
able for two additional USB ports. Connect the 5-pin ribbon cables from the
provided 2-port USB connector set to the two midboard 5-pin USB headers and
mount the USB connector set to an open slot on your chassis.
CUSL2-C BP
®
CUSL2-C BP USB Headers
USB56
USB2
1
USBPWR USBP2- USBP2+ GND
USBP5+ USBP5- USBPWR GND
19) Power Supply Thermal Sensor Connector (2-pin JTPWR)
If you have a power supply with thermal monitoring, connect its thermal sensor
cable to this connector.
CUSL2-C BP Thermal
Sensor Connector
CUSL2-C BP
®
JTPWR
Power Supply
Thermal Sensor