Asus VK193T - Manual (Page 18)

3-2 Chapter 3: General Instruction
3. Color
Select the image color you like from this
function.
• Color Temp: contains five color modes
including Cool, Normal, Warm, sRGB,
and User mode.
• Skin Tone: contains three color
modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-
configurable; the adjusting range is from 0-100.
2. Image
You can adjust Brightness, Contrast, ASCR,
Sharpness, Saturation, Position (VGA
only), and Focus (VGA only) from this main
function.
• Brightness: the adjusting range is from
0 to 100. is a hotkey to activate this
function.
• Contrast: the adjusting range is from 0 to 100. is a hotkey to activate
this function (For those models without speakers).
• ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.
• Sharpness: the adjusting range is from 0 to 100.
• Saturation: the adjusting range is from 0 to 100.
• Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
• Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
Color Temp
Skin Tone