3 main menu, 1 system time [xx:xx:xx, 3 primary ide master/slave – Asus P5KPL-AM SE User Manual

Page 48: Type [auto, Lba/large mode [auto

Advertising
background image

2-10

Chapter 2: BIOS setup

2.3

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving you an

overview of the basic system information.

Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and

how to navigate through them.

Select Screen

Select Item

+- Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

Advanced Power Boot Tools Exit

System Time

[14:14:35]

System Date

[Wed 04/16/2008]

Primary IDE Master

[Not Detected]

Primary IDE Slave

[Not Detected]

SATA 1

[Not Detected]

SATA 2

[Not Detected]

Storage Configuration

System Information

Use [ENTER], [TAB] or

[SHIFT-TAB] to select

a field.

Use [+] or [-] to

configure system time.

2.3.1

System Time [xx:xx:xx]

Allows you to set the system time.

2.3.2

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

2.3.3

Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is

a separate sub-menu for each IDE device. Select a device item then press <Enter> to display

the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These

values are not user-configurable. These items show N/A if no IDE device is installed in the

system.

Type [Auto]

Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate

IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select

[ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the device

supports this mode, and if the device was not previously formatted with LBA mode disabled.

Configuration options: [Disabled] [Auto]

Advertising