Asus M4N72-E - Manual (Page 59)

Chapter 2: BIOS setup 2-15
DCT0:CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:Address/Command drive str [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Processor on-die terminat [Auto]
Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%]
The following sub-items appear only when you set the DCT0/DCT1 Strength Config item
to [DCT 1] or [Both].
DCT1:CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:Address/Command drive strength. [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:Processor on-die termina [Auto]
Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%]
DQS Timing Configuration
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
adjust the DQS values.
The following sub-items appear only when you set the DQS Timing Configuration item to
[DCT 0], [DCT 1], or [Both].
CKE Setup Time [Auto]
Allows selection of the CKE setup time.
Configuration options: [Auto] [1/2 CLK] [1 CLK]