Asus P4R800-VM - Manual (Page 33)

ASUS P4R800-VM motherboard user guide 1-23
12. System panel connector (10-1 pin F_PANEL1)
This connector accommodates several chassis-mounted functions.
• Power LED (2-pin PWR_LED)
This connector is for the system power LED. The LED lights up when you turn on
the system power, and blinks when the system is in sleep mode.
If your motherboard package comes with a 2-pin to 3-pin power LED converter,
connect the 2-pin plug to this connector, and the other end to the 3-pin power
LED plug from the system chassis.
P4R800-VM
P4R800-VM F_Panel Connector
F_PANEL1
IDE LED-
Power LED+
IDE LED+
Ground
Power LED- Power Switch Ground
Reset
IDE_LED Reset Switch
Power LED Power Switch
P4R800-VM
P4R800-VM PLED Setting
PLED1
PLED+
1
NC
PLED-
11. Power LED Lead (3-1 pin PLED1)
This 3-1 pin connector is for the system power LED. Connect the 3-pin power
LED cable from the system chassis to this connector. The LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
The power LED lead (PLED1) is present only on PCB versions 1.03 or later.