Exiting the intel, Matrix storage manager utility, Resetting disks to non-raid – Asus P5LD2 User Manual
Page 131
A S U S P 5 L D 2
A S U S P 5 L D 2
A S U S P 5 L D 2
A S U S P 5 L D 2
A S U S P 5 L D 2
5 - 2 7
5 - 2 7
5 - 2 7
5 - 2 7
5 - 2 7
Exiting the Intel
Exiting the Intel
Exiting the Intel
Exiting the Intel
Exiting the Intel
®
®
®
®
®
Matrix Storage Manager utility
Matrix Storage Manager utility
Matrix Storage Manager utility
Matrix Storage Manager utility
Matrix Storage Manager utility
To exit the utility:
1.
From the utility main menu, select 4 . E x i t
4 . E x i t
4 . E x i t
4 . E x i t
4 . E x i t, then press <Enter>. This
window appears.
Are you sure you want to exit? (Y/N):
[
CONFIRM EXIT
]
2.
Press <Y> to exit or press <N> to return to the utility main menu.
Resetting Disks to Non-RAID
Resetting Disks to Non-RAID
Resetting Disks to Non-RAID
Resetting Disks to Non-RAID
Resetting Disks to Non-RAID
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1.
From the utility main menu, select 3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D,
then press <Enter> to display this screen.
2.
Use the up/down arrow key to highlight the RAID set drive you want
to reset, then press <Space> to select.
3.
Press <Enter> to reset the RAID set drive. A confirmation message
appears.
4.
Press <Y> to reset the drive or press <N> to return to the utility main
menu.
[
RESET RAID DATA
]
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
Select the disks that should be reset.
[
↑↓
↑↓
↑↓
↑↓
↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete