3 placement direction, 4 screw holes – Asus Maximus II Gene User Manual
Page 32
Advertising
DO NOT overtighten the screws! Doing so can damage the motherboard.
2.2.3
Placement direction
When installing the motherboard, ensure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
2.2.4
Screw holes
Place eight (8) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Place this side towards
the rear of the chassis
2-8
Chapter 2: Hardware information
Advertising