Asus RT-N14U - Manual (Page 50)

0 RT-N1U Chapter : Using the Utilities
Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router after a
failed firmware upgrade. This utility uploads a firmware file to the
wireless router. The process takes about three to four minutes.
To launch rescue mode and use the Firmware Restoration
utility:
1. Unplug the wireless router from its power source.
. While holding down the Reset button at the back of the
wireless router, plug the wireless router into a power source.
Release the Reset button when the Power LED at the front
panel begins to flash slowly, which indicates that the wireless
router is in rescue mode.
. Use the following to set up your TCP/IP settings:
IP address: 19.18.1.x
Subnet mask: ...0
. From your computer’s desktop, click
Start > All Programs > ASUS Utility RT-N14U Wireless
Router > Firmware Restoration.
Launch rescue mode before using the Firmware Restoration
utility.