Asus M2N-VM DVI - Manual (Page 63)

ASUS M2N-CM DVI 2-15
2.3.4 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
IDE Configuration
Onboard IDE Controller [Enabled]
Serial-ATA Devices [Enabled]
SATA Mode select [SATA Mode]
Onboard IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
Configuration options: [Enabled] [Disabled]
Serial-ATA Devices [Enabled]
Allows you to disable or set the Serial-ATA devices.
Configuration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID
Mode]
The following items appears only when the SATA Mode select item is set to
[RAID Mode].
SATA Primary Master/Slave Channel [Disabled]
Allows you to disable or enable the Serial-ATA Primary Master/Slave Channel.
Configuration options: [Enabled] [Disabled]
SATA Secondary Master/Slave Channel [Disabled]
Allows you to disable or enable the Serial-ATA Secondary Master/Slave Channel.
Configuration options: [Enabled] [Disabled]
Disabled: disables
the integrated IDE
Controller.
Enabled: enable
the integrated IDE
Controller.