Asus R300 - Manual (Page 4)

4
To turn on the device, set the main power switch (at the bottom of the device) to ON. To enter
into/wake up from sleep mode, press the Sleep Mode Button ( ) on the top of the device.

8 
Note:
- When the main power switch is set to Off, the device is not able to be charged.
- If you press the Sleep Mode button when the device is on, it enters into sleep
mode.
- When the device is on, it takes longer time for the battery to be fully charged.
When the device is in sleep mode, the battery can be fully charged quickly.
Install the Car Kit and Turn on the Device
To install the car kit:
1. Attached the cupula to the
windshield inside your car.
2. Press the lever to secure the
cupula on the windshield surface.
Note: Rise the lever (3) to release the
cupula from the windshield.
3. Adjust the angle of the
gooseneck and secure it by
fastening screwcap A.
4. Adjust the angle of the cradle and secure it by fastening screwcap B.
5. Carefully place and slide the device into the cradle.
screwcap A
Main power switch
Sleep Mode
Button
screwcap B
1

3
5