Asus NX1001 - Manual (Page 3)

3
English
Hardware Installation:
1. Shut down the computer, cut off the power source, then
open the chassis.
2. Remove a PCI shield and insert the network card into the
PCI slot. Secure the card to the chassis. Close the chassis.
3. Connect the Ethernet cable to the RJ-45 port of the card.
Install ASUS NX1001 Driver
Windows 98 SE, ME, 2000, and XP
After the installation is complete, restart your system.
Window automatically detects the new hardware. Insert
the support CD into your optical drive to autorun the driver
installation program.
Windows 98, NT4.0, Linux, Mac10.X, Novel, SCO5,
Solaris 8, Unixware 7
After installing the network adapter, insert the support CD
into your optical drive and follow the instructions in the
“Readme.txt” to install the driver.
Status Indicator and Port
LED Indicator:
ON:
Link established
Blinking: Link established. Transmitting data.
OFF: No link established.
Port:
RJ-45: For connecting the Ethernet cable.