Asus AT4NM10T-I - Manual (Page 41)

ASUS AT4NM10T-I 2-14
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
ASUS EZ Flash 2
Press ENTER to run the
utility to select and
update BIOS.
This utility supports
1.FAT 12/16/32(r/w)
2.NTFS(read only)
3.CD-DISC(read only)
AT4NM10T-I BIOS Setup Version 0306
Main Advanced Power Boot Tools Exit
2.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the sub-menu.
2.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. See section 2.1.2 ASUS EZ Flash 2 for details.