Asus TUWE-M - Manual (Page 19)

ASUS TUWE-M User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) USB/CNR Selection (CNRUSB1 / CNRUSB2)
This jumper switches the circuit power between the USB2 connector and the
CNR slot. Note that the default is set to power the USB2 connector.
Setting CNRUSB1 / CNRUSB2
Enable USB2 [1-2] (default)
Enable CNR [2-3]
4) Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. The jumper
is set to Enable. Pressing the <Spacebar> powers up the PC. This feature re-
quires an ATX power supply that can supply at least 300mA on the +5VSB lead.
Disable this jumber to stop power-up from the keyboard. NOTE: This jumper
must be set in conjunction with Wake On PS2 KB/PS2 Mouse/CIR in 4.5.1
Power Up Control.
Setting
KBPWR
Enable [1-2] (default)
Disable [2-3]
TUWE-M
®
TUWE-M Keyboard Power Setting
Enable
(default)
Disable
1 2 2 3
KBPWR
TUWE-M
®
TUWE-M USB/CNR Selection
CNRUSB1
CNRUSB2
1 2 2 3
CNR USB2 Connect
(default)
CNRUSB1
CNRUSB2