2 chipset, 3 onboard devices configuration, Chipset -12 – Asus P7H55-M SI User Manual

Page 40: Onboard devices configuration -12

Advertising
background image

2-12

Chapter 2: BIOS information

2.4.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then

press <Enter> to display the submenu.

Uncore configuration

DRAM Frequency [Auto]

Allows you to adjust the DRAM frequency. Configuration options: [Auto] [800 MHz]

[1067 MHz] [1333 MHz]

Memory Remap Feature [Enabled]

Allows you to enabled or disable the remapping of the overlapped PCI memory above

the total physical memory. Enable this option only when you install 64-bit operating

system. Configuration options: [Disabled] [Enabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device.

Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

IGD Graphics Mode Select [Enabled, 32MB]

Allows you to select the amount of system memory used by the Interanal graphics

device. Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 48MB] [Enabled,

64MB] [Enabled, 128MB]

Video Function Configuration

DVMT Memory [Maximum DVMT]

Allows you to select the DVMT memory.

Configuration options: [128MB] [256MB] [Maximum DVMT]

PAVP Mode [Lite]

Allows you to select the Protected Audio-Video Path (PAVP) mode.

Configuration options: [Disabled] [Lite] [Paranoid]

2.4.3

Onboard Devices Configuration

HDA Controller [Enabled]

Allows you to enable or disable the high definition audio controller.

Configuration options: [Enabled] [Disabled]

Intel(R) TurboMode Tech [Enabled]

This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo mode allows

processor cores to run faster than marked frequency in specific condition. Configuration

options: [Disabled] [Enabled]

Intel(R) C-STATE Tech [Enabled]

Allows you enable or disable the Intel

®

C-STATE Technology. When enabled, the CPU idle is

set to C2/C3/C4/C6. Configuration options: [Disabled] [Enabled]

C State package limit setting [Auto]

This item appears only when you set the Intel

®

C-STATE Tech item to [Enabled]. We

recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode

supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]

Advertising