Asus Xonar HDAV1.3 - Manual (Page 35)

2 ASUS Xonar HDAV .3
No Item Description
1 Analog Out The Analog Out setting is used to match your actual
speaker setting, such as headphones, 2 speakers (or 2.),
4 speakers (or 4.), 5. speakers, and 7. speakers. Xonar
HDAV .3 will play the channels and do the proper 3D/Dolby/
DTS sound processing accordingly. Please select the correct
speaker type for your connected speakers.
2 Speaker Test Click this button to show the speaker test window in the right
pane. Click the “play” button to test each speaker one by one
or click each speaker manually to test.
Note: the Speaker Test function is not available on Windows
Vista due to a limitation in its audio stack.
3 Speaker Swap Clicking this button will pop up an advanced setting window
to allow you to:
–Swap center/bass outputs for 5./7.-speaker set ups
-Swap Side/Surroud outputs for 7.-speaker set ups
Check the box if your speakers are outputting the incorrect
channel. Otherwise, leave them blank.
1 3 2
Analog Out / Speaker Test / Speaker Swap
Click the Analog mode button and configure the related settings when you
connect the Xonar HDAV .3 card to powered analog speakers or digital
home theater systems, etc.