Asus CUV4X-ME - Manual (Page 18)

18 ASUS CUV4X-ME User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
CUV4X-ME JumperFree™ Mode Setting
Jumper
Mode
JumperFree
Mode
(Default)
JEN
1 2 3
JEN
1 2 3
®
CUV4X-ME
ON
1 2 3 4 5 6 7 8 OFF
DIP_SW
NOTE: In JumperFree™ mode, all dip switches (DIP_SW) must be set to OFF.
Motherboard Features Settings (DIP Switches - DIP_SW)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
CUV4X-ME DIP Switches
ON
1 2 3 4 5 6 7 8 OFF
ON
< F
requency Multiple
< Frequency Multiple < Frequency Multiple < Frequency Multiple < Frequency Selection < Frequency Selection < Frequency Selection < Frequency Selection
®
CUV4X-ME