1 cpu level up [auto, 2 cpu overclocking [auto, Cpu level up [auto] -16 – Asus M5A88-V EVO User Manual

Page 72: Cpu overclocking [auto] -16, Chapter 3

Advertising
background image

3-16

Chapter 3: BIOS setup

Chapter 3

The configuration options for the following sub-items vary depending on the CPU/DIMMs

you install on the motherboard.

CPU/HT Reference Clcok (MHz) [XXX]

This item appears only when you set the CPU OverClocking item to [Manual] or [D.O.C.P]

and displays the frequency sent by the clock generator to the system bus and PCI bus. Use

the <+> and <-> keys to adjust the CPU Bus frequency. You can also key in the desired

frequency using the numeric keypad. The values range from 100MHz to 550MHz.

PCIE Frequency [XXX]

This item appears only when you set the CPU OverClocking item to [Manual] and allows you

to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE frequency.

You can also key in the desired value using the numeric keypad. The values range from

100MHz to 150MHz.

DRAM O.C. Profile [DDR3-1600MHz]

This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and allows

you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,

DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz]

[DDR3-1866MHz] [DDR3-2000MHz]

3.5.2

CPU OverClocking [Auto]

Allows you to select the CPU overclocking options to achieve the desired CPU internal

frequency. Select any of these preset overclocking configuration options:

Manual

Allows you to individually set overclocking parameters.

Auto

Loads the optimal settings for the system.

D.O.C.P

Allows you to select a DRAM O.C. profile, and the related parameters

will be adjusted automatically.

Overclock Profile

Allows you to select an overclocking profile.

3.5.1

CPU Level UP [Auto]

Allows you to select a CPU level, and the related parameters will be automatically adjusted

according to the selected CPU level. If you want to manually configure the settings in detail,

set CPU Overclocking to [Manual] after selecting a CPU level.

Configuration options: [Auto] [Phenom II-955] [Phenom II-3.4G] [Phenom II-3.6G]

The configuration options vary depending on the CPU model you install on the

motherboard.

The CPU Level UP function support depends on CPU types.

Advertising