Asus P2Z-B - Manual (Page 8)

8 ASUS P2Z-B User’s Manual
Features of the ASUS P2Z-B Motherboard
The ASUS P2Z-B is carefully designed for the demanding PC user who wants ad-
vanced features processed by the fastest CPU.
Specifications:
•
Multi-Speed: Supports Intel Pentium ® III (450MHz and faster), Pentium ® II
(233MHz to 450MHz), and Celeron TM (266MHz and faster) processors.
• Intel AGPset: Features Intel’s 440ZX AGPset with I/O subsystems and front-
side bus (FSB) platform, which boosts the traditional 66MHz internal bus speed
to 100MHz.
• Multi-Cache: Supports processors with either 512, 128, or 0KB Pipelined Burst
Level 2 cache.
• PC100 Memory Support: Equipped with three DIMM sockets to support Intel
PC100-compliant SDRAMs (8, 16, 32, 64, 128, or 256MB) up to 512MB. These
new SDRAMs are necessary to meet the critical enhanced 100MHz bus speed
requirement.
• Peripheral Wake Up: Supports modem wake up, keyboard wake up, and LAN
card wake up functions from sleep or soft-off mode.
• Thermal Sensor Connector with Optional Sensor: Accurately detects the CPU
temperature with the ASUS Smart Fan or the Intel boxed processor heatsink
with fan when connected to an ASUS P2T-Cable.
• PC Health Monitoring (optional): Provides an easier way to examine and man-
age system status information such as CPU and system voltages, temperatures,
and fan status through the onboard hardware ASIC and the bundled LDCM by
Intel or PC Probe from ASUS.
• AGP Slot: Supports an Accelerated Graphics Port card for high performance,
component level interconnect targeted at 3D graphical display applications us-
ing a 1X or 2X mode bus.
• SB-Link™: Features Creative’s SB-Link™, allowing SB16 compatibility, us-
ing Intel’s PC-PCI DMA and serialized IRQ protocols, to AWE64D or compat-
ible PCI audio cards.
• SMBus: Features the System Management Bus interface, which is used to physi-
cally transport commands and information between SMBus devices.
• PCI & ISA Expansion Slots: Provides three 32-bit PCI and two 16-bit ISA
slots.
• Multi-I/O: Provides two high-speed UART compatible serial ports and one par-
allel port with EPP and ECP capabilities. UART2 can also be directed from
COM2 to the Infrared Module for wireless connections.
• Ultra DMA/33 Bus Master IDE: Comes with an onboard PCI Bus Master IDE
controller with two connectors that support four IDE devices in two channels,
supports UltraDMA/33, PIO Modes 3 and 4 and Bus Master IDE DMA Mode 2,
and supports Enhanced IDE devices, such as Tape Backup and CD-ROM, and
LS-120 drives.
II. FEATURES
Specifications II. FEA
TURES