Asus P5A-VM - Manual (Page 14)

14 ASUS P5A-VM User’s Manual
III. INSTALLATION
Jumper Settings
1. VGA Interrupt Selection (INT_EN) / 2. VGA Setting (VGAEN)
INT_EN allows you to set the VGA interrupt method. The default disables the
chipset’s internal interrupt routing. Some TV tuners or MPEG cards may require
the interrupt be assigned by the onboard chipset, in which case INT_EN must be
enabled. VGAEN allows you to enable or disable the onboard VGA. Disable the
onboard VGA if you are using a VGA card on the expansion slot.
P5A-VM VGA Settings
Enable
(Default)
VGAEN
1
2
3
R
01
Disable
VGAEN
1
2
3
Enable
(Default)
INT_EN
1
2
3
Disable
INT_EN
1
2
3
Jumpers
III. INST
ALLA
TION
Installation Steps
Before using your computer, you must complete the following steps:
1. Set Jumpers on the Motherboard
2. Install System Memory Modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect Ribbon Cables, Cabinet Wires, and Power Supply
6. Setup the BIOS Software
1. Jumpers
WARNING! Computer motherboards, baseboards and components, such as SCSI
cards, contain very delicate Integrated Circuit (IC) chips. To protect them against
damage from static electricity, you should follow some precautions whenever you
work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.