Asus L5C - Manual (Page 45)

45
Using the Notebook PC
4
Inserting a PC Card (PCMCIA)
If there is a PC Card socket protector, remove it using the “Removing a PC Card” instructions below.
1. Press in the toggle eject button and release.
The recessed spring loaded toggle button will
extend when pushed in and released.
2. Press the extended button again to eject the
PC Card. Carefully pull the ejected PC card
out of the socket.
Removing a PC Card (PCMCIA)
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
1. Insert the PC card with the connector side first
and label side up. Standard PC cards will be
flush with the Notebook PC when fully in-
serted. Be sure the PC card is level when
inserting.
2. Carefully connect any cables or adapters
needed by the PC card. Usually connectors
can only be inserted in one orientation. Look
for a sticker, icon, or marking on one side of
the connector representing the top side.