Asus P5E3 - Manual (Page 148)

5-40 Chapter 5: Software support
To install the RAID driver in Windows XP:
1. During the OS installation, the system prompts you to press the <F6> key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the floppy disk with RAID driver into the floppy disk
drive.
3. When prompted to select the SCSI adapter to install, make sure you select
Intel(R) SATA / RAID Controller (Desktop ICH9R).
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows ® Vista:
1. Insert the floppy disk / USB device with RAID driver into the floppy disk drive /
USB port.
2. During the OS installation, select Intel ICH9R.
3. Follow the succeeding screen instructions to complete the installation.