Asus M2A-MX - Manual (Page 65)

ASUS M2A-MX 2-17
Block Mode [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]
2.3.6 IDE Configuration
The items in this menu allow you to set or change the configurations for the SATA
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Storage Configuration
Onboard SATA Channel [Enabled]
OnChip SATA Type [SATA]
Onboard SATA Channel [Enabled]
Allows you to enable or disable the onboard SATA channel.
Configuration options: [Disabled] [Enabled]
OnChip SATA Type [SATA]
Allows you to select the onchip SATA type. Configuration options: [SATA] [RAID]
[AHCI]
Options
Enabled
Disabled