Asus P2-M2A690G - Manual (Page 75)

5-17 ASUS P2-M2A690G
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]
5.3.4 SATA Configuration
The items in this menu allow you to set or change the configurations for the SATA
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Storage Configuration
OnChip SATA Channel
[Enabled]
OnChip SATA Type [SATA]
OnChip SATA Channel [Enabled]
Allows you to enable or disable OnChip SATA channel.
Configuration options: [Enable] [Disable]
OnChip SATA Type [SATA]
Allows you to select OnChip SATA type. Configuration options: [SATA]
[Legacy IDE] [AHCI]
Options
Disabled
Enabled