Asus P6X58-E PRO - Manual (Page 36)

2-16 Chapter 2: Hardware information
Chapter 2
P6X58-E PRO Motherboard Qualified Vendors Lists (QVL)
DDR3-1067 MHz capability
Vendors Part No. Size SS/
DS
Chip Brand Chip NO. Timing Voltage DIMM socket
support (Optional)
2 3 4 6
Crucial CT12864BA1067.8FF 1GB SS MICRON D9KPT 7 - • • •
Crucial CT12864BA1067.8SFD 1GB SS MICRON D9JNL 7 - • • •
Crucial CT12872BA1067.9FF 1GB SS MICRON D9KPT(ECC) 7 - • •
Crucial CT25664BA1067.16FF 2GB DS MICRON D9KPT 7 - • • •
Crucial CT25664BA1067.16SFD 2GB DS MICRON D9JNL 7 - • • • •
Crucial CT25672BA1067.18FF 2GB DS MICRON D9KPT(ECC) 7 - • • • •
ELPIDA EBJ10UE8BAW0-AE-E 1GB SS ELPIDA J1108BABG-DJ-E 7 - • • •
ELPIDA EBJ10UE8EDF0-AE-F 1GB SS ELPIDA J1108EDSE-DJ-F - - • • •
ELPIDA EBJ21UE8BAW0-AE-E 2GB DS ELPIDA J1108BABG-DJ-E 7 - • • • •
ELPIDA EBJ21UE8EDF0-AE-F 2GB DS ELPIDA J1108EDSE-DJ-F - - • • •
GEIL GG34GB1066C8DC 4GB ( 2x 2GB ) DS GEIL GL1L128M88BA115FW 8-8-8-20 1.3 • • • •
Hynix HMT112U6AFP8C-G7N0 1GB SS HYNIX H5TQ1G83AFPG7C 7 - • • • •
Hynix HYMT112U64ZNF8-G7 1GB SS HYNIX HY5TQ1G831ZNFP-G7 7 - • •
Hynix HMT125U6AFP8C-G7N0 2GB DS HYNIX H5TQ1G83AFPG7C 7 - • • • •
Hynix HYMT125U64ZNF8-G7 2GB DS HYNIX HY5TQ1G831ZNFP-G7 7 - • • •
Kingston KVR1066D3N7/1G 1GB SS Kingston D1288JPNDPLD9U 7 1.5 • • • •
Kingston KVR1066D3N7/2G 2GB DS Elpida J1108BDSE-DJ-F 7 1.5 • • •
KINGSTON KVR1066D3N7K2/4G 4GB ( 2x 2GB ) DS KINGSTON D1288JELDNGD9U - 1.5 • • • •
MICRON MT8JTF12864AZ-1G1F1 1GB SS MICRON 8ZF22 D9KPV 7 - • • •
MICRON MT8JTF12864AZ-1G1F1 1GB SS MICRON D9KPT 7 - • • •
MICRON MT16JTF25664AZ-1G1F1 2GB DS MICRON 8ZF22 D9KPV 7 - • • •
MICRON MT16JTF25664AZ-1G1F1 2GB DS MICRON D9KPT 7 - • • •
SAMSUNG M378B5273BH1-CF8 4GB DS SAMSUNG K4B2G0846B-HCF8 8 1.5 • • •
Elixir M2Y2G64CB8HC5N-BE 2GB DS Elixir N2CB1G80CN-BE - - • • •
Elixir M2Y2G64CB8HC9N-BE 2GB DS - - - - • • • •
WINTEC 3DU3191A-10 1GB DS Qimonda IDSH51-03A1F1C-10F 7 - • • •
6 DIMM Slots
•
2 DIMM: Supports two (2) modules inserted into slot A1 and B1 as one pair of Dual-
channel memory configuration
• 3 DIMM: Supports three (3) modules inserted into the orange slots (A1, B1 and C1) as
one set of Triple-channel memory configuration
• 4 DIMM: Supports four (4) modules inserted into the orange slots (A1, B1 and C1) and
the black slot A2 as one set of Triple-channel memory configuration
• 6 DIMM: Supports six (6) modules inserted into both the orange slots and the black
slots as two set of Triple-channel memory configuration.
• When installing total memory of 4GB capacity or more, Windows 32-bit operation
system may only recognize less than 3GB. Hence, a total installed memory of less
than 3GB is recommended.
• It is recommended to install the memory modules from the slots for better overclocking
capability.
• The default DIMM frequency depends on its Serial Presence Detect (SPD), which is
the standard way of accessing information from a memory module. Under the default
state, some memory modules for overclocking may operate at a lower frequency than
the vendor-marked value.