Asus M5A78L-M LX3 - Manual (Page 33)

4. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD Activity LED lights up or flashes when data is read from or
written to the HDD.
• Power/Soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
M5A78L-M LX3
M5A78L-M LX3 System panel connector
PIN 1
PWR BTN
PLED
+
PLED
-
PWR GND
HD_LED
+
HD_LED
-
Groun
d
Reset
F_PANEL
PWR LED
+HD_LED RESET
5. Speaker connector (4- pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
M5A78L-M LX3
M5A78L-M LX3 Speaker Out Connector
+5
V
GN
D
GN
D
Speaker Ou
t
SPEAKER
PIN 1
ASUS M5A78L-M LX3 1-23