Asus P8H67-M EVO - Manual (Page 70)

3-8 Chapter 3: BIOS setup
Chapter 3
BCLK/PEG Frequency [XXX]
Allows you to adjust the CPU operating frequency to enhance the system performance. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 80.0MHz to 300.0MHz.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
GPU Boost [Disabled]
GPU Boost accelerates the integrated GPU for extreme graphics performance.
Configuration options: [Disabled] [Enabled]
iGPU Max. Frequency [Auto]
This item appears only when you set the GPU Boost item to [Disabled] and allows you to
set the maximum iGPU frequency. Use the <+> and <-> keys to adjust the value. The values
range from 1100Mhz to 3000Mhz with a 50Mhz interval. To restore the default setting, type
[auto] using the keyboard and press the <Enter> key.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
EPU Setting [AUTO]
This item appears only when you set the EPU Power Saving Mode item to [Enabled] and
allows you to select the EPU power saving mode.
Configuration options: [AUTO] [Light Power Saving Mode] [Medium Power Saving Mode]
[Max Power Saving Mode]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU
model.