Asus P5VDC-X - Manual (Page 31)

1-19 ASUS P5VDC-X
1.7.5 Installing a DDR2 DIMM
Unplug the power supply before inserting or removing DIMMs or other
system components. Failure to do so can cause severe damage to both
the motherboard and the components.
To install a DDR2 DIMM:
1. Unlock a DDR2 DIMM socket
by pressing the retaining
clips outward.
2. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
3. Firmly insert the DIMM into
the socket until the retaining
clips snap back in place and
the DIMM is properly seated.
• A DDR2 DIMM is keyed with a notch so that it fits in only one
direction. Do not force a DIMM into a socket to avoid damaging the
DIMM.
• The DDR2 DIMM sockets do not support DDR DIMMs. DO not install
DDR DIMMs to the DDR2 DIMM sockets.
Unlocked retaining clip
1.7.6 Removing a DDR2 DIMM
Follow these steps to remove a DDR2 DIMM.
1. Simultaneously press the
retaining clips outward to
unlock the DIMM.
2. Remove the DIMM from the socket.
Support the DIMM lightly
with your fingers when
pressing the retaining
clips. The DIMM might get
damaged when it flips out
with extra force.
DDR2 DIMM notch
3
2
1
DDR2 DIMM notch
1
2
1