Asus CUA - Manual (Page 35)

35 ASUS CUA User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Connectors
10) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
CUA Floppy Disk Drive Connector
PIN 1
FLOPPY
CUA ®
11) Feature (VMI) Connector (26-pin VMI)
This connector supports ASUS or third party video accessories, such as video
capture cards or television tuners.
CUA Feature (VMI) Connector
CUA ®
1 13
14 26