Configure dram timing by spd [enabled, Initiate graphic adapter [peg/pci, South bridge configuration – Asus P5KPL/1600 User Manual

Page 72: Audio controller [azalia

Advertising
background image

2-26

Chapter 2: BIOS setup

North Bridge Configuration

Memory Remap Feature [Disabled]

Allows you to enable or disable the remapping of overlapped PCI memory above

the total physical memory. We recommend that you set this item to Enabled when

you install 4GB memory. Configuration options: [Enabled] [Disabled]

Configure DRAM Timing by SPD [Enabled]

Allows you to enable or disable configurating DRAM Timing by SPD. Configuration

options: [Enabled] [Disabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device.

Configuration options: [PCI/PEG] [PEG/PCI]

North Bridge Chipset Configuration

Memory Remap Feature

[Disabled]

Configure DRAM Timing by SPD [Enabled]

Initiate Graphic Adapter

[PEG/PCI]

ENABLE: Allow

remapping of

overlapped PCI memory

above the total

physical memory.

DISABLE: Do not allow

remapping of memory.

South Bridge Configuration

Options

Audio Controller [Azalia]

Allows you to set the audio controller. Configuration options: [Azalia] [Disabled]

Front Panel Support Type [HD Audio]

Allows you to select the front panel support type. If High Definition Audio

Front Panel used, please set HD Audio mode. Configuration options: [AC97]

[HD Audio]

South Bridge Chipset Configuration

Audio Controller

[Azalia]

Front Panel Support Type

[HD Audio

]

Options

Azalia

Disabled

Advertising