Asus P5N-EM HDMI - Manual (Page 76)

2-28 Chapter 2: BIOS setup
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Parallel Port Address [378/IRQ7]
Allows you to select the Parallel Port address. Configuration options: [Disabled]
[378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode. Configuration options: [SPP] [EPP]
[ECP] [ECP+EPP] [Normal]
The “ECP Mode Use DMA” item becomes user-configurable when the Parallel
Port Mode item is set to [ECP] or [ECP+EPP]
The “EPP Mode Select” item becomes user-configurable when the Parallel Port
Mode item is set to [EPP] or [ECP+EPP]
EPP Mode Select [EPP1.7]
Allows you to select EPP mode. Configuration options: [EPP1.9] [EPP1.7]
ECP Mode Use DMA [3]
Allows you to select ECP mode use DMA. Configuration options: [1] [3]