Asus S5N - Manual (Page 20)

20
2
Knowing the Parts
Left Side
Refer to the diagram below to identify the components on the left side of the Notebook PC.
Microphone Input Jack (Mic-In)
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals
from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for
video conferencing, voice narrations, or simple audio recordings.
Headphone Output Jack (Head-Out)
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to ampli-
fied speakers or headphones. Using this jack automatically disables the built-in speakers.
2.0 USB Ports (1.1 & 2.0)
Universal Serial Bus (USB) supports many USB compatible devices such as keyboards, pointing de-
vices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in a series
up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simulta-
neously on a single computer, with peripherals such as USB keyboards and some newer monitors
acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that peripherals can
be connected or disconnected without restarting the computer.
DCOUT
MS.SD.MMC
Air Vents DC Power
Output
Mic
Input
Head
Output
Monitor
Output
USB 2.0
Ports
Flash Memory
Card Reader
Monitor Port
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or pro-
jector to allow viewing on a larger external display.
DC IN
DC Power Output Jack
This jack supplies power to computer peripherals such as an optical drive or external hard disk drive.
Flash Memory Card Reader
The built-in memory card reader can read the following flash memory cards: Secure Digital (SD),
Multi-Media Card (MMC), Memory Stick (MS), Memory Stick Select (MS Select), Memory Stick
Duo (with MS adapter), Memory Stick Pro, and Memory Stick Pro Duo (with MS Pro adapter).