Pio mode, Udma mode – Asus A8N5X User Manual

Page 61

Advertising
background image

A S U S A 8 N 5 X

A S U S A 8 N 5 X

A S U S A 8 N 5 X

A S U S A 8 N 5 X

A S U S A 8 N 5 X

2 - 1 7

2 - 1 7

2 - 1 7

2 - 1 7

2 - 1 7

2.3.5

2.3.5

2.3.5

2.3.5

2.3.5

Primary and Secondary IDE Master/Slave

Primary and Secondary IDE Master/Slave

Primary and Secondary IDE Master/Slave

Primary and Secondary IDE Master/Slave

Primary and Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press <Enter> to display the IDE device information.

The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user-configurable. These items show N/A if no IDE device is installed in the
system.

PIO Mode

PIO Mode

PIO Mode

PIO Mode

PIO Mode

Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]

UDMA Mode

UDMA Mode

UDMA Mode

UDMA Mode

UDMA Mode

Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]

IDE Primary Master/Slave [Auto]; IDE Secondary Master/

IDE Primary Master/Slave [Auto]; IDE Secondary Master/

IDE Primary Master/Slave [Auto]; IDE Secondary Master/

IDE Primary Master/Slave [Auto]; IDE Secondary Master/

IDE Primary Master/Slave [Auto]; IDE Secondary Master/
Slave [Auto]

Slave [Auto]

Slave [Auto]

Slave [Auto]

Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the BIOS automatically fills in the correct values for
the remaining fields on this sub-menu. If the hard disk was already
formatted on a previous system, the setup BIOS may detect incorrect
parameters. Select [Manual] to manually enter the IDE hard disk drive
parameters. If no drive is installed select [None].
Configuration options: [None] [Auto] [Manual]

F1:Help

↑↑↑↑↑↓

: Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit

→←

→←

→←

→←

→←: Select Menu

Enter: Select Sub-menu

F10: Save and Exit

Phoenix-Award BIOS CMOS Setup Utility

Main

Select Menu

Item Specific Help

Press [Enter] to
select

Primary IDE Master

PIO Mode

[

Auto

]

UDMA Mode

[Auto]

Primary IDE Master

[Auto]

Access Mode

[Auto]

UDMA Mode

[Auto]

Capacity

13579 MB

Cylinder

26310

Head

16

Sector

63

Transfer Mode

UDMA 4

Advertising