Asus P8Z77-I DELUXE/WD - Manual (Page 161)

ASUS P8Z77-I DELUXE 4-55
Chapter 4
5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle
marks the selected drive. Press <Enter> after completing your selection.
6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5
only),and then press <Enter>. The available stripe size values range from 4KB to 128KB. The
following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the
CREATE VOLUME menu.
7. When the Capacity item is selected, enter the RAID volume capacity that you want and press
<Enter>. The default value indicates the maximum allowed capacity.
8. When the Create Volume item is selected, press <Enter>. The following warning message
appears: